In electronics, a fuse is a type of low resistance resistor that acts as a sacrificial device to provide overcurrent protection, of either the load or source circuit. Its essential component is a metal wire as Cu, Sn, Au, etc that melts when too much current flows, which interrupts the circuit in which it is connected. Short circuit, overloading, mismatched loads or device failure are the prime reasons for excessive current.

A fuse interrupts excessive current so that further damage by overheating or fire is prevented. Wiring regulations often define a maximum fuse current rating for particular circuits. Overcurrent protection devices are essential in electrical systems to limit threats to human life and property damage. Fuses are selected to allow passage of normal current plus a marginal percentage and to allow excessive current only for short periods. Time Delay (or slow Blow) fuses are designed to allow harmless short term higher currents but still clear on a sustained overload. Fuses are manufactured in a wide range of current and voltage ratings and are widely used to protect wiring systems and electrical equipment. Self-resetting fuses automatically restore the circuit after the overload has cleared; these are useful, for example, in aerospace or nuclear applications where fuse replacement is impossible.

Fusible element is connected by wire bonding technology. Wire bonding is the primary method of making interconnections between an integrated circuit (IC) and a printed circuit board (PCB) during semiconductor device fabrication. Although less common, wire bonding can be used to connect an IC to other electronics or to connect from one PCB to another. Wire bonding is generally considered the most cost-effective and flexible interconnect technology, and is used to assemble the vast majority of semiconductor packages.

• ■ Our process remove solder process that have been essential for fuse manufacturing since invented, then make to possible environment-friendly device
• ■ It can provide diversification of the size , simplification of the manufacturing process, production automation and miniaturization to customer requirements
• ■ It has vast electric performance by fusible element design as height, length, spacing of Copper Wire